In-time motion adjustment in laser cladding manufacturing process for improving dimensional accuracy and surface finish of the formed part

This paper presents in-time motion adjustment in laser cladding manufacturing process as a means to improve dimensional accuracy and surface finish of the built part. Defects occurring during laser cladding degrade the part quality such as dimensional accuracy and surface finish. In this paper, in-time motion adjustment strategy was presented to remedy and eliminate defects occurring during laser cladding to improve the dimensional accuracy and surface finish. Based on the relationship between the motion of laser head relative to the growing part and other parameters in effects on clad profile, the laser traverse speed, stand-off distance and laser approach orientation to the existing clad layer were adjusted by instructions from a close-loop control system in real time to remedy and eliminate defects. The results of the experiments verified the effects of in-time motion adjustment on dimensional accuracy and surface finish.     

Local adsorption sites and bondlength changes in Ni(1 0 0)/H/CO and Ni(1 0 0)/CO

The local adsorption geometry of CO adsorbed in different states on Ni(1 0 0) and on Ni(1 0 0) precovered with atomic hydrogen has been determined by C 1s (and O 1s) scanned-energy mode photoelectron diffraction, using the photoelectron binding energy changes to characterise the different states. The results confirm previous spectroscopic assignments of local atop and bridge sites both with and without coadsorbed hydrogen. The measured Ni–C bondlengths for the Ni(1 0 0)/CO states show an increase of 0.16 ± 0.04 Å in going from atop to bridge sites, while comparison with similar results for Ni(1 1 1)/CO for threefold coordinated adsorption sites show a further lengthening of the bond by 0.05 ± 0.04 Å. These changes in the Ni–CO chemisorption bondlength with bond order (for approximately constant adsorption energy) are consistent with the standard Pauling rules. However, comparison of CO adsorbed in the atop geometry with and without coadsorbed hydrogen shows that the coadsorption increases the Ni–C bondlength by only 0.06 ± 0.04 Å, despite the decrease in adsorption energy of a factor of 2 or more. This result is also reproduced by density functional theory slab calculations. The results of both the experiments and the density functional theory calculations show that CO adsorption onto the Ni(1 0 0)/H surface is accompanied by significant structural modification; the low desorption energy may then be attributed to the energy cost of this restructuring rather than weak local bonding.     

Distribution results for lattices in SL(2,ℚ p )

In this paper we study the ergodic properties of the linear action of lattices Γ of SL(2,ℚ_p) on ℚ_p × ℚ_p and distribution results for orbits of Γ. Following Serre, one can define a “geodesic flow” for an associated tree (actually associated to GL(2,ℚ_p)). The approach we use is based on an extension of this approach to “frame flows” which are a natural compact group extension of the geodesic flow.     

Determination of residual monomers in acrylate dispersions by gas chromatography

The content of residual monomers is one of the most important characteristics of polymer dispersions. As a result of the similar physicochemical parameters of ethyl acrylate and methyl methacrylate, it is very difficult to determine the residual monomers in acrylate dispersions obtained by emulsion polymerization of both monomers. Gas chromatography with capillary columns, however, permits separation of these monomers and their quantitative determination in acrylate dispersions.     

THE CLASSIFICATION AND PERIOD OF STATES FOR MARKOV CHAIN IN RANDOM ENVIRONMENT

This paper is a continuation of [8]. In Section 1, three kinds of communication are introdnced for two states and the relations among them are investigated. In Section 2, two kinds of period of a state are introdnced and it is obtained that the period is a “class property” ,i.e. two states x and y belong to same class implies the period of x is equal to the period of y.     

Universal elementary constituents of potential transformations shifting waves (qualitative theory)

It is shown that the potential perturbation that shifts a chosen standing wave in space is a block of potential barrier and well for every wave bump between neighbouring knots. The algorithms shifting the range of the primary localization of a chosen bound state in a potential well of finite width are as well applicable to the scattering functions if states of the continuous spectrum are considered as bound states normalized to unity but distributed on an infinite interval with vanishing density. The potential perturbations of the same type on the half-axis concentrate the scattering wave at the origin, thus creating a bound state embedded into the continuous spectrum (zero width resonance).     

Observable signals of gauge-mediated supersymmetry breaking

The observable consequences of gauge-mediated supersymmetry breaking (GMSB) are reviewed here. Implications of scenarios both with a neutralino and a slepton as the next lightest supersymmetric particle (NLSP) are surveyed in relation to hadronic ande ⁺ e ^- colliders. We also discuss the phenomenological consequences of the NLSP decaying slowly, giving rise to delayed events in the detectors.The importance of distinguishing signals of GMSB models from those of the commonly discussed supergravity-type theories is emphasized.     

THERMAL AND THERMO-ELASTIC-PLASTIC RESPONSE OF CERAMIC-METAL FUNCTIONALLY GRADED MATERIALS—THERMAL SHOCK PROBLEM

The thermal and thermo-elastic-plastic response of newly developed ceramic-metalfunctionally graded materials under a thermal shock load is studied.The materials are heated at the ce-ramic surface with a sudden high-intensity heat flux input,and cooled at the metal surface with aflowing liquid nitrogen.Emphasis is placed on two aspects:(1)the influence of the graded composi-tion of the materials on the temperature and stress response;and(2)the optimum design of the gradedcomposition from a unified viewpoint of the heat insulation property and stress relaxation property.Moreover,a comparison between the thermoelastic stress and the thermo-elastic-plastic stress is alsomade to indicate the plasticity effect.     

集值Lebesgue—Stieltjes积分

本文首先刻划了B(R_ )上的集值测度,其次建立了(R_ B(R_ ))上的集值Lebesgue-Stieltjes积分.最后,进—步建立了集值随机Lebesgue-Stietjes积分的理论.     

Dérivée des petites valeurs propres des surfaces de Riemann

On estime la dérivée des petites valeurs propres du Laplacien sur une famille de surfaces de Riemann. Ces valeurs propres sont considérées comme des fonctions sur l'espace de Teichmüller, et l'estimation des dérivées peut s'exprimer dans ce contexte. Received: December 21, 1995